PP Pleated Filter Cartridge cater to high efficiency filtration requirement. They are constructed of high purity polypropylene materials which increasing dirt holding capacity. The materials comply with FDA related requirement.The high surface area enable high flow rates and long service life. The series of cartridge with multiple layered microporous ensure stable performance and broad chemical compatibility. The micron rating can be nominal and absolute.
Pre-filtration for RO system
Solvents,selected acids & lyes,chemical industry
Smiconductor,Electronic industry ultrapure water system
Food and beverage
Oil and Gas industry
Pharmaceutics
Paints,coatings and plating solutions
Material of Construction
Filter Media: Polypropylene
Support : Polypropylene
Core / Cage / End adaptor: Polypropylene
Sealing Technology: Thermal bonding
Seal Material:Silicone,EDPM,Buna,Viton, Teflon,E-FKM
Micron Rating: 0.1µm, 0.22µm, 0.45µm, 0.65µm,0.80µm, 1µm, 3µm, 5µm, 10µm, 20µm, 50µm
Filtration Area: 0.61m2 each 10" length
Outside diameter: 2.7” (69mm)
Length: 5", 10", 20", 30", 40"
Forward - 4.2bar@ 23°C
Reverse - 1bar@ 80°C
Max. Operating Temperature: 80°C
Sterilization Temperature Time: 5times, 20 Minutes cycles at 120°C
Model PPF |
Micron Rating |
End Adaptor | Seal | Length |
PPF |
010:0.1µm 020:0.2µm 045:0.45µm ........ 10:1µm 30:3µm ........ 500:50µm ........ |
Code 0 - DOE Double open end 1 - 226/Fin 2 - 222/Fin 3 - 222/Flat closed 4 - 226/Flat closed 5 - 215/Flat closed 6 - O-ring insert/Flat closed |
E-EPDM N-Buna S-Silicone V-Viton T-Teflon E-FKM |
5" 10" 20" 30" 40" |