The Kontrol 500-series are advanced controllers designed for high-end applications. The units feature independent proportional PID-enabled control outputs, RS 485 serial port with MODBUS protocol, USB port on request, probe quality checking, a variety of outputs and full data logging capability. The user has full programming authority.
Graphic display 128 x 64 pixel resolution mono- chrome display with graphic icons to show: digital outputs’ status, data storage, washing cycle, alarms
nclosure box wall mounting ABS plastic material IP65 (144x144) and panel mounting IP54 (96x96)
Universal Power Supply 100 - 240 Vac 50/60 Hz
Internal Flash Memory with records interval from 1 to 99 min. (near to 16000 records). Visualization key for stored data in tabular and graphic form. Type: Circular (F.I.F.O.) or Filling.
For set-up and real-time data acquisition from remote or for stored data download on PC or laptop (Communication Software Master Controller NET required). MODBUS RTU communication protocol.
Download measuring data on removable memory Usb Pen Drive (upon request).
• High measuring resolution with probe quality control. • A modular measuring system
• Chlorine measure in sea water application.
4 - 20mA Galvanic isolation Two independent programmable. Output Measures with PID routine regulation.
Four independent relays, two set points, one alarm remote output, one backwashing probe output. On/OFF, Timed routine function setting.
• Waste Water
• Drinking Water
• Pure Water
• Cooling Towers
• Boiler
• Reverse Osmosis
• Crate Wash
• Galvanic Process
• CIP
• Irrigation
• Swimming Pool
• Dairy
pH | 0 - 14 pH |
ORP | ±1500 mV |
Conductivity | 0 - 20/ 200/ 2000/ 20000/ 200000 μS |
Inductive Conduct | 0 - 1000/ 10000/ 100000/ 999999 μS |
Dissolved Oxygen | 0 - 20 ppm or mg/l • 0 - 200% SAT |
Chlorine and Chlorine Dioxide |
0-0.5/1/2/5/10/20/200 ppm |
Hydrogen Peroxide | 0 - 500/ 1000/ 2000/ 10000/ 100000 ppm |
Ozone (O₃) | 0 - 0.5/ 2/ 5/ 10 ppm |
Peracetic Acid | 0 - 500/ 2000/ 10000/ 20000 ppm |
Turbidity | 0 - 1/ 10/ 100 NTU/FTU |
Suspended Solids Turbidity |
0 -4/40/400/4000NTU/FTU•0-30gr/l |
Temperature | with PT100/PT1000 32 - 212 °F (0 - 100°C) |