PP Melt Blown Filter Cartridge is constructed of 100 % polypropylene fibers without any chemical glues. The fibers have been carefully spun together to form a true gradient density from outer to inner surface.As the depth fiber and density make the filter cartridge in strong pollutants holding capacity. It can remove contaminant effectively. Polypropylene fibers are blown continuously on central molded core, which conform with FDA standard requirement.
Drinking water treatment
electronic industry
Chemicals and Solvents
Material of Construction
Filter Media:Polypropylene
Core:Polyproplene or not
Seal Material:Silicone,EDPM,Buna,Viton
Micron Rating: 1µm, 3µm, 5µm, .. 100µm
Outside diameter: 2.5”,4.5"
Inside diameter:28mm or 30mm
Length: 5", 10", 20", 30", 40"
Max. Operating Temperature: 80°C
Max. Differential Pressure: 2.0 bar @ 21°C
|
Model PPE |
Support Core |
Dimension |
Micron Rating |
End Adaptor | Seal |
Length Inch |
|
PPF-A Standard PPf-B Thin groove PPF-C Broad groove |
P-PP N-none |
A-ID28mm OD2.5" B-ID28mm OD4.5" C-ID30mm OD2.5" D-customize |
1:1µm 3:3µm 5:5µm 10:10µm ........ ........ 100:100µm |
0-DOE 1-226/Fin 2-222/Fin 3-222/Flat closed |
E-EPDM N-Buna S-Silicone V-Viton |
5:5" 93/4:93/4 97/8:97/8" 10:10" 20:20" 30:30" 40:40" 50:50" |