High Flow Filter Cartridge

Description

High Flow Filter Cartridge is single open ended which design for the direction from an inside to outside flow pattern. The large filter area ensure the high dirt holding capacity. The low cost save the number of filter cartridge. Long service life and superior flow rates are the main characteristics. All contaminants can be removed efficiently. Our High flow filter cartridge can be replace for PALL ULTIPLEAT ,CUNO 3M,PARKER MEGAFLOW and PENTAIR AQUALINE FILTERATION SYSTEMS

Applications

Prefiltration fo RO,Pretreatment of sea water desalination

Bottled water,high Fructose,edible oil,soft drinks

API,solvents,and water filtration in BioPharm market

Paints and coatings,Petrochemical,Refineries

Microelectronics

Specification

Material of Construction

Media:Pleated glass fiber,Pleated depth PP,or Melt blown PP

Support layer: Polypropylene

Core / Cage / End adaptor: Polypropylene

End adaptor:Glass fiber reinforced Polypropylene

Seal Material:Silicone,EDPM,Buna

Micron Rating:  1µm, 4.5µm,6µm,10µm,20µm,40µm,70µm,100µm

Filtration Area: 20.69 inch length is 660LPM;  40.69 inch length is 1,300LPM;  60.69 inch length is 1,900LPM.

Dimensions

Outside diameter: 6” (152mm)

Length: 20.69 inch(525mm)/ 40.69 inch(1033mm)/ 60.69 inch(1541mm)

Recommended Operating Conditions

Maxximum Operating TEmperature:

Pleated glass fiber:121°C

Pleated PP:82°C

Melt Blown PP:65°C

Maximum Differential Pressure:Pleated glass fiber:3.4bar at 121°C

Pleated PP:3.4Bar at 82°C

Melt Blown:1.03Bar at 65°C

Recommended Change out Differential Pressure:2.4Bar at 20°C

Ordering