PTFE Pleated Filter Cartridge is constructed of PTFE media and nonwoven support materials. This kind of pleated filter cartridge is absolutely rate and in hydrophobic condition. It possess low pressure drop and high flow rates. The extensive applicability enable filter cartridge to be high strength, long service life and cost-effective. Having a particulate removal rating of 0.1um for gas and microorganisms of 0.2um for liquids. 100% integrity tested by bubble point and diffusional flow to ensure consistent and reliable performance. Oxidation-resistant materials of construction for such filter cartridge. No adhesive, thermal bonded manufacturing without adhesives.
Solvent filtration
Sterile venting of tanks
Fermentation air applications
semiconductors
Gas
Pharmaceutical
Material of Construction
Media:Hydrophobic PTFE
Support layer: Polypropylene
Core / Cage / End adaptor: Polypropylene
Sealing Method: Thermal bonding No Adhesives
Seal Material:Silicone,EDPM,Buna,Viton, Teflon,E-FKM
Micron Rating: 0.1µm, 0.22µm, 0.45µm
Filtration Area: 0.61m2 each 10" length
Outside diameter: 2.7” (69mm)
Length: 5", 10", 20", 30", 40"
Forward - 4.2bar@25°C
Reverse - 2.0bar@25°C
Max. Operating Temperature: 95°C
Sterilization: 120°C Every 30 Minutes,100times
Micron Pore Size | 100%IPA Bubble Point |
0.1µm | 1.5 bar |
0.2µm | 1.0bar |
0.45µm | 0.6bar |
Model PTFE |
Micron Rating |
End Adaptor | Seal | Length |
PTFE-HB |
010:0.1µm 020:0.2µm 045:0.45µm |
Code 0 - DOE Double open end 1 - 226/Fin 2 - 222/Fin 3 - 222/Flat closed 4 - 226/Flat closed 5 - 215/Flat closed 6 - O-ring insert/Flat closed |
E-EPDM N-Buna S-Silicone V-Viton T-Teflon E-FKM |
5" 10" 20" 30" 40" |