PTFE Pleated Filter Cartridge is constructed of PTFE media and nonwoven support materials. This kind of pleated filter cartridge is absolutely rate and in hydrophilic condition. The compatibility with a broad range of chemicals provides long service life. No need for pre-wetting and 100% integrity testable prior to release. It possess high throughputs and superior flow rates.
Prefiltration and terminal filtration during most food process
medical liquid degerming
filtration for organic solvent,various alcohols
Material of Construction
Media:Hydrophobic PTFE
Support layer: Polypropylene
Core / Cage / End adaptor: Polypropylene
Sealing Method: Thermal bonding No Adhesives
Seal Material:Silicone,EDPM,Buna,Viton, Teflon,E-FKM
Micron Rating: 0.1µm, 0.22µm, 0.45µm
Filtration Area: 0.61m2 each 10" length
Outside diameter: 2.7” (69mm)
Length: 5", 10", 20", 30", 40"
Forward - 4.2bar@ 25°C
Reverse - 2.8bar@ 25°C
Max. Operating Temperature: 95°C
Sterilization: 120°C Every 30Minutes
Micron Pore Size | 100%IPA Bubble Point |
0.1µm | 1.2 bar |
0.2µm | 1.0bar |
0.45µm | 0.75bar |
Model PTFE |
Micron Rating |
End Adaptor | Seal | Length |
PTFE-HL |
010:0.1µm 020:0.2µm 045:0.45µm |
Code 0 - DOE Double open end 1 - 226/Fin 2 - 222/Fin 3 - 222/Flat closed 4 - 226/Flat closed 5 - 215/Flat closed 6 - O-ring insert/Flat closed |
E-EPDM N-Buna S-Silicone V-Viton T-Teflon E-FKM |
5" 10" 20" 30" 40" |