PES Pleated Filter Cartridge is constructed of excellent PES(polyethersulfone) media and pp(polypropylene) materials to meet high standard performace. With unique hydrophilic characteristics and absolutely rate, this filter shows good flow rates. The compatibility with a broad range of chemicals provides long service life. 100% integrity tested by bubble point and diffusional flow to ensure consistent and reliable performance. No adhesive, thermal bonded manufacturing enable the smallest contaminant extraction and high durability.
Micro-filtration in ultrapure water systems
Beverage,wine,draft beer and other drinks
Plating solutions
Pharmaceutics
Chemical industry
Material of Construction
Media: Hydropphilic per membrane
Support layer: Polyproplene
Core/Cage/End adaptor:Polyproplene
Sealing Method: Thermal bonding No Adhesives
Seal Material:Silcone,EDPM,Buna,Viton,Teflon,E-FKM
Micron Rating: 0.1µm, 0.22µm, 0.45µm
Filtration Area: 0.64m2 each 10" length
Outside diameter: 2.7” (69mm)
Length: 5", 10", 20", 30", 40"
Max. Differential Pressure:
Forward - 4.2bar@ 25°C
Reverse - 2.1bar@ 25°C
Max. Operating Temperature: 80°C
Sterilization: 20times, 30 Minutes cycles at 121°C
|
Pore Size |
Minimum Water Bubble Point |
Diffusional Flow cc/min @ Test Pressure per 10" length |
| 0.1µm | - | ≤15 @ 3.3 bar |
| 0.2µm | ≥3.1 bar | ≤15 @ 2.4 bar |
| 0.45µm | ≥1.8bar | ≤15 @ 1.4 bar |
| Model PES |
Micron Rating |
End Adaptor | Seal | Length |
| PES |
010:0.1µm 020:0.2µm 045:0.45µm |
Code 0 - DOE Double open end 1 - 226/Fin 2 - 222/Fin 3 - 222/Flat closed 4 - 226/Flat closed 5 - 215/Flat closed 6 - O-ring insert/Flat closed |
E-EPDM N-Buna S-Silicone V-Viton T-Teflon E-FKM |
5" 10" 20" 30" 40" |